AiolosAir® HybriCool Flat Adiabatic Cooling Air Conditioning Units; It feeds 100% fresh air to offices, cafeterias, hygienic and medical areas, sports halls, schools, shops, common and individual living spaces that are desired to be ventilated, making the area it serves healthier and more comfortable.
HybriCool Flat Adiabatic Cooling Air Conditioning Units cool the 100% fresh air taken from outside with natural cooling by using the evaporation energy of the water. In addition to natural cooling, it does not need any other device in the place where it is used, with an integrated compressor, condenser and evaporator in order to meet the indoor cooling need. By heating with cooling and heat pump, it can meet the air conditioning of the environment with 100% fresh air alone.
It is possible to use the HybriCool Flat Air Conditioning Unit with the cooler and / or heater battery added to the unit in places with a central system cooling group and / or hot water supply. Especially in use for heating purposes, a steam humidifier can be added to provide indoor comfort humidity conditions.
Evaporative cooling (EC) technology is based on heat and mass between air and cooling water. Direct evaporative cooling (DEC) relies on mechanical and thermal contact between air and water, whereas indirect evaporative cooling (IEC) is heat and mass transfer between two air streams separeted by a heat transfer surface where only air is cooled, and a wet surface where both air and water are cooled. These two air streams do not mix.
The HybriCool-Flat Indirect Evaporative Cooling Air Conditioning Unit cools the supply air in Hybrid Mode to support the design requirements. With the help of Indirect Evaporative Cooling (IEC), as a pre-cooler, the supply air is cooled down to a certain temperature and with the integrated DX refrigerant cooling, the additional cooling requirement is met to obtain the required cooling capacity. Thanks to demand-controlled DX cooling, the compressor only runs when needed.
Aiolos Air HybriCool Flat Air Conditioning Unit offers you the most suitable solution according to your purpose and place;
Filter on the fresh air side G2 (ISO Coarse) Filter + F7 (ISO ePM1) Filter
Proportional speed controlled EC Fans
Adiabatic cooling module
Factory-mounted automation equipments, MCC board
Thanks to its web-based software; smartphone, tablet, laptop and PC access, control and monitor the device with
Communication with building automation with BACnet IP, BACnet MS / TP, MPBUS and Modbus RTU
Cooling and / or heat pump heating with integrated DX compressor, condenser and evaporator
Steam humidifier on the fresh air side
Compact water softening unit
All these features and much more of the HybriCool Flat Adiabatic Refrigerated Air Conditioning Units, can be integrated into the building automation with the help of internal sensors in the unit, as well as remotely monitored, managed and turned on and off with phones, tablets and all computers. In addition to all these, you can see the pollution status of the filters, create daily - weekly - monthly and annual reports, save data and access many more data related to the unit via this internal and unique automation software
HybriCool Flat Application Areas
Hygienic and Medical Areas
Common and Individual Living Areas
In all indoor places that need fresh air HybriCool Flat offers you comfort with energy efficient air conditioning.
HybriCool Flat Application Areas
HybriCool Flat consists of six standard products from 600m³ / h to 5000m³ / h flow rate;
HF-06 - 600 m³/h
HF-12 - 1200 m³/h
HF-20 - 2000 m³/h
HF-30 - 3000 m³/h
HF-40 - 4000 m³/h
HF-50 - 5000 m³/h
G2 (ISO Pre-Filtering) + F7 aPM1
Captures up to 65% of particles larger than 1 micron
Proportional controlled EC Fan
Filter pollution warning via automation system
Unit operating values and performance information can be observed through the automation system, input (initial) values can be changed by the authorized user
High efficiency with low energy consumption
Easy connection with other ventilation units
HybriCool Flat Remote Control
HybriCool units are ready for remote monitoring and operation via web-based software and IoT technology. You can operate your unit either with your smart phone, tablet PC or with your computer. Connection to your local BMS system is also possible depending on your protocol.
Web-based communication gives us to monitor your unit with our technicians 24h / 365 days and able to get alarms directly. We offer you preventive maintenance service, to serve your unit when we get any alarms, before any malfunction. We reduce your service, spare part and maintenance cost in efficient way to sustain high performance operation of the unit. If any support or maintenance needed at site, with the help of remote monitoring feature, we can detect the fault of the unit in our customer support centre and report it to our aftersales service technicians to give support at site in fast and efficient way
HybriCool Flat Product Catalogue_EN